This high build corrosion resistant hybrid industrial dryfall coating did a nice job as the primer on this older but easily restored commercial building, t118 does a fine job in this situation, now topcoat it with t1029 and away you go, hi Pavlos.
Have structural steel to coat let us suggest the proper coating for the job. This i670 photo top-coated with i990v offers great structural steel protection in a “sauna room” type of environment, I’m sure Paulino is standing by.
The c683 series, non-sparking, the dielectric coating is safe to use in many areas, like NB Power Point Lepreau, diamond grind the floors use c688 primer and then use this self-leveling non-slip coating (no grit is required) for a long-lasting outstanding finish,...
Need chemicals, trust LDG to provide the latest equipment for rent or hire with special nozzles and pickup tool to release chemicals for your toughest cleaning task.
When CCNB Campbellton needed a long-lasting finish for their grand entranceways they contacted us. New technology Polyaspartic and polysiloxane coatings and now fluoropolymer is the longest lasting coatings in the industry, specify Tnemec t700 on your next project...
Marine Coatings are their finest, DTI and Coastal run this Deer Island ferry, I was proud to be a supplier for this important project and have recently been asked to test our Deck Coatings on Gondola Point ferry.
Safe touch, finished project photo of safe touch coatings by Tnemec/LDG, t1029T shown, hot pipes were prepped by power grinding and sp1 solvent wash, then, of course, all areas not to be painted had to be masked off, then t1224 primer was used followed by multiple...
Shown here is the t971 aerolon coating after application, this specially designed coating has aerogel in it which gives the temperature resistance for safe touch conditions, now the personnel can lean on this pipe while they turn off the control behind it and not burn...
This shows the t1224 after it was applied, this water-based primer is designed to seal the existing surfaces and create a good base for subsequent coats.
This NS Provincial government bridge managed by Trails NS allows ATVers and others to get across the iconic River Philip bridge located in oxford nova scotia, home to spencer’s general years ago.
Showing one of 3 spans that made up the bridge, fabricated by A&M and painted by Sandtech in the winter of 2017, (inside a shop of course), finish showing is p346 polyurethane, for a longer lasting finish use t700.
This picture shows a sample structural steel beam that has t971 applied on it for Thermal Break needs, this process stops cool air from being pulled into a building resulting in cold spots and mold or mildew creation.
Amherst, NS, Finished photo shown with p346, below that is Grey epoxy primer p4402 by Polyval which seals the existing surface to provide a solid base for finishes like p346
